0333 323 2100
Hire Quote
Hire
Depot
My
Hire Equipment
Showing 361–420 of 725 results
-
Diesel Floor Planer
Diesel Floor Planer For Levelling, Cleaning and Keying Concrete Surfaces Using a Variety of Graded Grinding Stones and Wire Brushes.
-
Concrete Mixer (Petrol) 1/2 Bag
Portable tip up Petrol Concrete Mixer for all small to medium building projects. Lightweight and portable, the mixer mixes a full barrow-load and can hold up to half a bag at a time. Used with the stand, it allows barrow-height mixing and tipping.
-
Concrete Mixer (Electric) 240v 1/2 Bag
Our portable tip-up 240V concrete mixer is ideal for all small to medium building projects. The mini 240v cement mixer has been designed specifically to be lightweight and portable. The mixer takes a full barrow load and can hold up to half a bag at a time.
-
Concrete Mixer (Electric) 110v 1/2 Bag
Our portable tip up 110v electric concrete mixer is suitable for all small to medium sized building projects. Designed specifically to be both lightweight and portable, this electric cement mixer is easy to use.
-
Diamond Tile Table Saw (620mm cut)
The Diamond Tile Table Saw - 110V with its simple table top design and a maximum cut length of 620mm. Features a powerful professional motor that veterans and novices alike will enjoy operating.
-
Trolley Floor Tile Stripper
The Trolley Floor Tile Stripper (110V) - MS 230™ Multistripper has been developed for removing floor coverings from smaller projects and confined areas.
-
Handheld Floor Tile Stripper – 110V (with pole)
Handheld Floor Tile Stripper 110V (with pole) is a custom made electric floor stripper featuring a Makita motor.
-
Hydraulic Block Splitter
The Hydraulic Block / Stone Splitter - 610mm (24") is ideal for splitting paving flags. They are an ideal companion on any paving job.
-
Stone Splitter
Stone / Block Splitter - 306mm (12") is ideal for splitting paving flags. These manually operated stone/block splitters are a great portable piece of equipment for the re sizing of stone/blocks and are an ideal companion on any paving job.
-
Wall Chaser
-
Nibbler
These Nibbler - 240V tools from Smiths are the best way to manually cut sheet metal away from the edge.
-
Bridge Saw Tile Cutter (660mm cut)
The 200mm Bridge Saw Tile Cutter - 240V; is ideal for cutting into granite and tiles for kitchen units, with a cutting width of up to 660mm.
-
Petrol Saw Bench
-
Electric Saw Bench
The powerful Electric Saw Bench - 356mm (14") from Smiths Hire is used to cut bricks, blocks, large tiles and slabs. The side-mounted cutting arm and blade gives “straight through” cutting capacity for long materials.
-
MiTower 6m One-Man Kit
MiTower 6m One-Man Kit; Only takes one person to assemble or dismantle quickly on site. When dismantled, all of the tower parts fit nicely into the trolley base which can then be manoeuvred around the project with ease.
-
Electric Floor Saw
The Electric Floor Saw (3 Phase - 450mm / 17.7") by SPE offers a quick, simple way of cutting or edging masonry. Simple to operate and highly durable – the CS 450 range of SPE floorsaws are ideal for demanding heavy duty applications.
-
STIHL Cordless Masonry Saw – 230mm / 9″
This STIHL Cordless Masonry Saw (TSA 230) is the first battery-powered cut-off machine with a 9" / 230 mm cutting wheel, and it is particularly light and small at only 3.9 kg (without battery). Emission-free cordless technology ensures clean work, both indoors and outdoors.
-
Husqvarna K 760 Cut-n-Break
The Husqvarna K 760 Cut-n-Break enables you to cut as deep as 400mm from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool.
-
EVOSAW230 Industrial Circular Saw 230mm
The EVOSAW230 Circular Saw is of Industrial quality with a 230mm Blade. It will cut steel without heat, burrs or coolant and with optional blades cut is capable of cutting Stainless Steel, Aluminium & Wood. Equipped with a Laser Sight System, which is intended as a guide.
-
Arbortech AS175 Brick & Mortar Saw 110V/240V
Engineered to significantly improve safety and efficiency when cutting brick walls, mortar and more. It is capable of cutting square, deep and with precision. It is ideal for Trade Professionals and DIY Enthusiasts, with a number of specialised blade options for specialised applications.
-
Masonry Bridge Saw (1000mm cut)
The 350mm 110V Masonry Bridge Saw (1000mm cut length) is a robust, strongly made bridge saw. Ideal for a wide variety of building materials including large floor and wall tiles, roof tiles and natural stone.
-
Pressurised Water Container for Cut Saw
This Pressurised Water Container for Cut Saw provides a mobile water supply and ensures clean, wet cutting without dust build up. No need for an external water connection.
-
STIHL Cut Saw Cart c/w Water Tank
The STIHL Cut Saw Cart is specially designed for use with STIHL cut saw machines when cutting expansion cuts or curbs and a wheeled tool is necessary. This cart offers improved handling and cutting performance with a forward weight orientation and a toolless quick connect system.
-
Electric Circular Metal Cutting Saw
A 178mm (9") Electric Circular Metal Cutting Saw is not that dissimilar from its wood cutting counter-part. The major difference is that it has more power and is equipped with very specific metal cutting blades.
-
TCT Bench Cut-Off Saw
The 110V 356mm (14") TCT Bench Cut-Off Saw is ideal for cutting through thick metal beams and metal rods whether they are steel, aluminium or copper. The powder coated sheet steel design with galvanised steel table, makes for a very sturdy and durable machine.
-
Bench Cut-Off Saw
The 110V 356mm (14") Bench Cut-Off Saw is ideal for cutting through thick metal beams and metal rods whether they are steel, aluminium or copper. The powder coated sheet steel design with galvanised steel table, makes for a very sturdy and durable machine.
-
Palm Sander
Palm Sander ideal if you are ready to redecorate a room and have awkward sanding jobs to perform – such as skirting boards, then a palm sander is a quick convenient alternative than the age-old sandpaper and block.
-
Floor Edging Sander
Our Floor Edging Sander 240V 178mm (7") will allow you to smooth all types of wooden flooring including pre-finished parquet, plank and laminate. Ideal for confined areas such as cupboards or closets and stair treads as it's able to sand right up the the edge of the floor without damaging your skirting boards.
-
Floor Sander 240V 203mm (8″)
A Floor Sander 240V 203mm (8") from Smiths will allow you to smooth all types of wooden flooring including pre-finished parquet, plank and laminate. From full scale sanding to edging and finishing; these sanders will help transform a rough floor into a surface suitable for any home.
-
Belt Sander
Belt Sander - 110V 102mm (4"); ideal to smooth flat, rough timber surfaces quickly, efficiently and professionally. These powerful machines allow large flat straight surfaces to be sanded in half the time of any other sander.
-
Drywall Sander
The DWS 225 Drywall Sander is specially designed for the most efficient sanding of drywall or plaster walls and ceilings.
-
Door Trimming Saw
Door Trimming Saw - 110V - Door trimmers can be used for more than just trimming doors without having to take them off the hinges. They can also be used for trimming door frames, cutting joints between boards/blocks and even cutting expansion joints.
-
Single Scaffold Clip
-
Worktop Jig
Worktop jigs are essentially templates that can allow you to make accurate cuts in wooden surfaces. They can be used for routing and cutting in kitchens, bathrooms and for on worktops.
-
Scaffold Sleeve Coupler
-
Scaffold Joint Pin
-
Sash Cramp
Sash Cramp 1.2m (4') (Each) - Whether you are building a cabinet, frame, laying floorboards or simply holding two pieces of wood together, Smiths has a cramp or clamp that will ensure you achieve a professional looking finish.
-
Double Scaffold Clip
-
Plunge Router
If you are cutting joints, grooves or creating mouldings then these powerful 110v plunge routers will produce quick, clean and accurate results.
-
Diamond Core Drill
With the Hilti DD 110-D Diamond Core Drill dry drilling is the ideal alternative to wet drilling. When a strong current of air or gas is involved in the cutting process rather than a fluid. It is the safer drilling method when things like electric wires are involved and water cannot be used.
-
Laminate Trimmer
A laminate trimmer can help you make clean, consistent, accurate cuts that reduce the risk of having an uneven edge. For a more professional looking job, a laminate trimmer is the best way to go.
-
Re-Bar Cutting Tool
The Rebar cutter tool (16mm) is purpose built for construction or all kinds of other things that relate to rebar (steel bar, steel rod) cutting.
-
Secret Floor Nailer
Secret Floor Nailer (Porta) - a great tool to quickly lay standard tongue and groove floorboards. You simply position the tool and then strike the plunger with the mallet supplied to sink in the nail.
-
Hand Tile Cutter (various sizes)
Light and functional Hand Tile Cutter (Ceramic) for intensive cutting of ceramic tiles, ideal for Wall and Floor tiles.
-
4ft LED Tube Light – 36W (110V)
The 4ft LED Tube Light - 36W (110V) provides a 360° light angle. The compact, linkable design makes this portable LED light easy to transport and easy to set up to brighten any workspace.
-
LED Minipod Light 35W 110V
LED lights provide numerous benefits compared to halogen lighting and can work in tougher more extreme conditions and temperatures. This portable LED lighting also has the added benefit of having lower running costs, making it a cost-effective lighting solution.
-
Smith Light Battery Operated Site Light (Long-Last)
The Smith Light is a portable LED and rechargeable site light with a single-sided light head. It’s Robust and solid in terms of construction, and is manufactured from ABS and polycarbonate. Designed to allow you to work safely and efficiently in low light conditions.
-
1 Ton High Tip Dumper
Our 1 Ton Dumper with its High Tip function is small but mighty! Due to the capability of the Hi Tip, the Dumper can lift a maximum load of 1 ton up to a tipping height of 1.57m.
-
3 Ton Articulated Swivel Dumper
This 3 Ton Articulated Swivel Dumper 4WD has the same features as a standard dumper with the added benefit of a Power Swivel function, making it ideal for jobs where turning space is limited, and comes with a payload of 3 ton.
-
High Tip Tracked Dumper Truck (950kg)
The Messersi TC95D 950Kg (0.8t) Hi Tip Tracked Dumper Truck is a high specification machine. It has stand out features such as a 950Kg carrying capacity.
-
4WD 3 Ton Dumper
Our 4WD 3 Ton Dumper offers a large heaped skip, capable of holding up to 3000Kg and has a Power Tip which is perfect for simple forward tip applications offering a generous heaped capacity of 1,950 litres.
-
LED 110v 32A Quad Mast Light On Stand
This LED 110v 32A Quad Mast Light is the perfect alternative to halogen lighting, giving a clean energy efficient white light making it a great on-site solution. The Elite LED mast light is an energy efficient unit which can be used to light up large areas, with its 4 rotatable heads, optimum light coverage can be achieved.
-
6 Ton Articulated Swivel Dumper Truck
This heavy duty 6 Ton Articulated Swivel Dumper Truck has the same features as a standard dumper, but with the added benefit of a power swivel function, making it ideal for jobs where turning space is limited.
-
Skid Steer Loader
The Bobcat S100 Skid Steer Loader offers you a "tiny but mighty" solution for your industrial and daily needs. The S100 is just the right size with enough lift capacity to help you in small spaces.
-
4WD 6 Ton Articulated Dumper
This 6 Ton Dumper offers a large skip capacity along with a powerful engine, exceptional service access and is designed for added strength and longevity. Front Tip Dumpers can carry loads around the most challenging terrain.
-
9 Ton Dumper
The Thwaites 9 Ton Dumper is manufactured with contractors and hirers in mind. It ensures operator safety, with reduced risk on site and improved performance. Featuring a safe working load of 9000kg.
-
9.0m Halide Lighting Tower
The 9.0m Halide Lighting Tower - the VT1 Eco is equipped with 4 traditional 1000W metal halide floodlights and the special features timer and darkness sensor, allowing the automatic start and stop of the machine for a great fuel saving and low operating costs.
-
Large Diamond Core Drill Kit
This electric drill motor and stand system is ideal for a variety of core drilling applications. This powerful system is perfect for medium core drilling in walls, floors and roofs up to 250mm diameter.
-
Dry Diamond Core Bit
Dry Diamond Core Bit Attachment for boring holes in walls and firmer materials. Available in sizes from 22mm to 102mm.
-
Wet Diamond Core Bit
Wet Diamond Core Bit Attachment for boring holes in walls and firmer materials. Available in sizes from 14mm to 400mm.
Sometimes you just can't see the wood for the trees. No problem - our experts are on hand to point you in the right direction.
Tel: 0333 323 2100
Contact FormMore about Smiths Hire
