0333 323 2100
Hire Quote
Hire
Depot
My
Hire Equipment
Showing 241–300 of 725 results
-
Sledge Hammers (various sizes)
A general purpose heavy hammer for builders and contractors. Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Available in 7lb, 10lb and 14lb.
-
Crane Forks
Very similar to the forks that you would typically see on a forklift, Crane Forks are used to go underneath a load and lift from the bottom. This ensures that the load is lifted effectively and safely with no chance of dropping. Ideal for lifting pallets, crates and more. Adjustable width and height to suit... Read more »
-
Site Security Tool Chest (various sizes)
Keep tools safe and in one place with a handy Site Security Tool Chest from Smiths Hire. A safe and secure place to put your tools. Stop rods inside chest allow you to keep lid open. Available in 2 different sizes: 1.2m x 0.6m 1.2m x 1.2m
-
Boot Wash Station
The Boot Wash Station is a simple yet effective way of maintaining cleanliness of your footwear. Wash off mud, wet cement and anything else you might come into contact with when working on site with this easy to use station.
-
Rubbish Chute Bins
Rubbish Chute Bins 508mm (20") enable you to keep your site tidy, when working above ground floor level. Acting as a safe and effective way of transferring rubbish to a skip on the ground.
-
Rubbish Chute Side Entry
Rubbish Chute Side Entry enable you to keep your site tidy, when working above ground floor level. Massively convenient to have on-site and this model features a side entry access for extra flexibility.
-
Gas Bottle Storage Cage (various sizes)
Protect your gas bottles from theft with a lockable storage unit. Two different size options available; small or large.
-
Trench Struts (various sizes)
Rugged adjustable supports for formwork during construction as well as floors, walls and ceilings. Available in 3 different size options: Size 1 – 450mm to 710mm Size 2 – 680mm to 1140mm Size 3 – 1040mm to 1750mm
-
Carpet Dryer
The Carpet Dryer - EIPL AM2000 setup could not be easier, plus its low profile outlet snout makes it ideal to duct air under carpets, thereby immediately attacking the worse effected areas quickly and efficiently.
-
Propane Space Heaters (various sizes)
Our propane space heaters provide large volumes of clean warm dry air for heating large spaces such as halls, marquees and areas where people are present. Also ideal for drying buildings and plaster during construction.
-
Chain Block Hoists (various sizes/weights)
-
Trestles (various sizes)
Adjustable Steel Trestles (or Bandstands) are available in three sizes and they are wide enough for four standard scaffold boards, to provide a safe working platform for bricklayers, plasterers and painters.
-
Drain Stoppers (4″ – 24″)
Drain Stoppers (4" - 24") are ideal when the device’s wing nut is screwed tighter a rubber bung expands to create an airtight seal within a pipe. These are used for pressure testing pipe systems.
-
Drain Air Bags (various options)
Inflatable Canvas Drain Testing Air Bag with inflatable rubber bladder (various sizes available) ideal for blocking off pipes during maintenance.
-
Wall Grinder (12″ / 14″)
The 110V electric Wall Grinder from Smiths Hire offers a powerful and versatile performance when being used indoors or outdoors. It is available in two sizes: 306mm (12") and 350mm (14").
-
Angle Grinder (various options)
Powerful electric Angle Grinders - 110V / 240V (127mm / 230mm) is an ideal means of achieving a professional job. Whether this is grinding, cutting or scoring both masonry or metal materials, you'll get the job done!
-
Power Floats (24″ – 48″)
Power Floats are ideal for jobs that require a lightweight, highly manoeuvrable, professional finishing tool. Very quick, high specification finish to concrete.
-
Pan for Power Float (24″ – 48″)
A Power Float Pan is used with a Powered Float when finishing concrete to achieve a smoother, flatter floor.
-
Concrete Test Cube Mould (various sizes)
With a Concrete Test Cube Mould, casting concrete couldn't be easier. These no fuss, professional quality moulds are design to encase concrete until it sets into a cube.
-
Air Vibrating Pokers (2″ / 3″)
Pneumatic vibrating pokers from Smiths are ideal for the fast compacting of low slump concrete often used in footing or formwork.
-
Heavy Duty Turntable Trucks (various sizes)
-
LED Festoon Lighting (various options)
LED Festoon Lighting is used mainly for refurbishment work where a string of bulbs can be hung around a space to enable adequate lighting to continue working after dark.
-
Hydraulic Breaker Attachments (various options)
Hydraulic Breaker Attachments 0.8t - 5t for diggers are a trusted means of prolonged periods of breaking.
-
Hydraulic Drive & Auger for 1.5t Excavator / Digger
Why try and dig hundreds of holes for mass tree plantation when an auger attachment for a Smiths digger can do the same job in half the time and with no aches or pains along the way.
-
Bottle Jacks
Smiths Bottle and Toe Jacks offer a Simple way of lifting machines and are suitable for a wide range of general jacking operations.
-
Toe Jacks (3T / 6T / 10T)
-
Cable Reel Screw Jacks (various sizes)
Cable reel screw jacks are the simple and cost effective and efficient way of distributing a large payload of cable from cable reels. Cable reels are positioned on the cable jack and the hydraulic operating jack lifts the reel from the ground, enabling the reel itself to freely rotate.
-
4 Leg Lifting Brothers (various sizes)
The Four Leg Chain Sling is a versatile piece of Lifting Equipment which can be assembled to meet your own requirements. Assembled in different formations to suit most lifting application.
-
Dust Extractor (Tromb 400)
The DC Tromb 400 by Dustcontrol is our most powerful 1-phase dust extractor. It is designed to meet modern safety requirements and to work in conjunction with tools that have become ever more efficient.
-
Exhaust Filters (various options)
Exhaust particulate filters should be included as personal safety equipment for those who work with diesel or petrol powered vehicles that are started or driven indoors.
-
Plant / Access Trailer (various options)
The Plant / Access Trailer is for the transportation of heavy Plant / Access equipment around large sites. Available in 2000Kg & 2600Kg weight capacities.
-
Forklift Trucks (various sizes)
Forklifts are easy to use, low maintenance, powerful machines, available in size options - 3.0m Forklift Truck SWL 1.5t and 6.5m Forklift Truck SWL 2.5t
-
Trench Sheets (various sizes)
Our range of sheeting is designed to cover a range of uses in both temporary and permanent works. The overlapping range can be used for a wide range of applications from digging and placing of short sheets in shallow excavations, to full driving in deep excavations. Available in five different sizes: 2.0m 3.0m 4.0m 5.0m 6.0m
-
Stairwell Kits (Various platform heights: up to 6m)
Stairwell Kits are ideal for domestic or commercial use. Various platform heights available up to 6m.
-
MiStairs (MiTower Stairwell Add-on Kit)
MiStairs (MiTower Stairwell Add-on Kit) - quick-assembly stairwell access tower for a more versatile solution for work on a stairwell. One Man Tower with less than a 20min assembly time.
-
Staging Boards (various options)
These lightweight staging boards can be used in conjunction with various handrail systems and are available in two widths. Lengths are available from 2.4 m to 7.2 m.
-
Timber Scaffold Boards (various options)
-
Lyte Room Scaffold Towers (various heights)
Lyte Room Scaffold Towers are safe, stable and mobile, ideal for working safely at a height below two meters. They come with a fold up system for ease of storage and transport and are available from 0.66m - 6.1m heights.
-
Short Narrow AGR Towers (various heights)
Short Narrow AGR Towers are ideal for all your non-powered access requirements. 0.8m wide x 1.8m long and are available in a variety of height options.
-
Long Narrow AGR Towers (various heights)
Long Narrow AGR Towers are ideal for all your non-powered access requirements. 0.9m wide x 2.5m long and are available in a variety of height options.
-
Short Standard AGR Tower (various heights)
Short Standard AGR Tower are ideal for all your non-powered access requirements. 1.4m wide x 1.8m long and available in a variety of height options.
-
Long Standard AGR Towers (various heights)
Long Standard AGR Towers are ideal for all your non-powered access requirements. 1.4m wide x 2.5m long and available in a variety of height options.
-
Dust Extractor Source Cleaner (Dustcontrol 2900)
The DC 2900 Dust Extractor by Dustcontrol is our most popular dust extractor. It is suitable for vacuum cleaning and source extraction from handheld power tools (with up to 5” suction casings) and small table saws.
-
Submersible Dry Puddle Pump (1″)
Submersible Dry Puddle Pump (1") is able to pump water down to 1mm, Which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces.
-
Submersible Water Pump (1″)
Submersible Water Pump (1") offers high performance, is ideal for home and garden use and will pump within 3.2 mm of the floor. It is suitable for 1/2" - 1" flexible hose.
-
3″ Diesel-Powered Diaphragm Pump
3" Diesel-Powered Diaphragm Pump capable of outputting over 180 litres of water per minute. Positive displacement will pump air ideal for keeping trenches dry where water is seeping in can be run dry without causing damage.
-
EVO Water Filled Barrier
They are designed to create a solid wall leaving no gaps between each barrier when linked together. 3 x 1 Metre EVO Barriers (water filled to fill line) with mini mesh panels withstood wind speed of up to 55mph.
-
Petrol Site Welder (200amp)
Petrol Site Welder Hire (200 amp) /generator, powered by an oil alert petrol engine. Its hard wearing design makes it suitable for most on-site applications.
-
Arc Welder
The 140A 240V Arc Welder c/w Leads use a welding power supply to create an electric arc between an electrode and the base material which melts the metals at the point of contact.
-
Electrofusion Welder
The SBOX-LITE 110V Electrofusion Welder is a lightweight control box which is capable of welding any brand of electrofusion fittings for gas, water and other pressure pipe applications.
-
DF Smart Mist Cannon
The DF Smart from Generac is the smallest dust control unit of the Dust Fighter range for outdoor jobs. It is extremely light, easily portable, and it can be used in a lot of different application fields on small working areas.
-
Genie Super Hoist GH-5.6
Lightweight, compact and portable, this telescopic pneumatic hoist allows an individual to lift heavy loads into place for installation. The hoist is powered by either CO2 or compressed air that provides approx. 80 to 90 lifts from a single tank of CO2.
-
Single Load Mover Skates
This is a heavy duty load mover skate that is designed to move machinery or heavy crates. Ideal for moving large and cumbersome loads more that one skate can be used.
-
Wire Rope Winch
This Wire Rope Winch offers the versatility needed to tackle the variety of jobs encountered in forestry, agriculture, civil engineering and steel erection. Whether you are needing to lift the load or pull it into position, here's a Winch that is up to the task.
-
Concrete Easy Float
An Easy Float is used to smooth and improve concrete surfaces. With a handle for ease of use and a swivel head, the blade can move freely across the surface.
-
26-28kg Pneumatic Breaker
The 26-28kg Pneumatic Road Breaker perfect if you need a powerful, safe and environmentally friendly way to break up roads, pavements, paths or concrete slabs.
-
Chuck Hammer Drill
A 13mm Chuck Hammer Drill is quite simply a drill with a hammering action where the whole chuck moves backwards and forwards in a piston-like motion to deliver the hammering action. Ideal for more commercial work.
-
Hilti TE3000 30kg Heavy-Duty Breaker
Our TE3000 electric road breaker for hire is simple to transport and easy to use. This heavy-duty electric road breaker for hire is ideal for digging and tamping in earthwork, breaking concrete in demolition, repair work and pipe laying.
-
Hilti TE1000 10kg Breaker
The Hilti TE1000 10kg electric concrete breaker for hire boasts high performance and anti-vibration technology. Ideal for removing tiles, demolishing concrete and masonry, as well as for the renovations of floors of different materials.
-
13kg Pneumatic Demolition Pick
If you need a powerful, safe and environmentally friendly way to break up roads, pavements, paths or concrete slabs; a pneumatic breaker from Smiths will help you get the job done.
Sometimes you just can't see the wood for the trees. No problem - our experts are on hand to point you in the right direction.
Tel: 0333 323 2100
Contact FormMore about Smiths Hire
